Software and Hardware Tips

Hai friends

are you connecting two computers in network


Steps :
connect the two computers together either with a Crossover cable or a Hub/Switch to the ethernet card in your computer.
Set the IP address on both computers. Goto Start > Control Panel > Network Connections (choose switch to classic view if you cannot see network connections)
Look for your Local Area Connection ethernet adapter, right-click and choose properties.
Select Internet Protocol TCP/IP and choose properties.
Setup the IP as 192.168.1.1 and the subnet mask of 255.255.255.0 on the first computer and 192.168.1.2 on the second with the same subnet mask.
Choose OK then OK/close again.